page up
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Products listed on this page: poly floater wing kit -- full body blue water wing kit - muzzle reinforcement kit - teak stabilizer wing kit - teak ballst wing kit
enclosed track kit - teak maintenance kit - front hoop assembly - misc. parts


FRONT HOOP ASSEMBLY - for freeshafting

New Front Hoop Assembly Kit was designed for divers
who would like to convert their teak open model style
spearguns into a freeshafting gun.

Easy installation. Can be removed and added at any time.

 

K-8000



HIGH DENSITY FRONT FLOATER WING Kit
Made of 24 lb. high density foam molded polyurethane. Designed primarily for the Metal Tech Series spearguns for added buoyancy and stabilization with parallel pull.

May be used on teak models for additional floatation when using a heavier shaft. Floats all metal guns without shaft and floats metal guns with added reel or aluminum muzzle.

page up

K-5500

 

 

 

 

 

 

 



FRONT TEAK STABILIZER WING Kit
Used for increased accuracy & power on larger spearguns. It may be installed by the RIFFE factory or installed by the speargun user following simple instructions.

K-6000

page up

Front Stabilizer

 

BLUE WATER WING Kit
The Blue Water Wing Kit maintains stability while tracking fish and reduces recoil during firing. Designed for the #W Blue Water speargun only.

Weighted and finished teak wood kits includes drawing and all hardware for ease of mounting.

K-5000

Blue Water Wing Kit

 

page up

TEAK BALLAST Kit
Designed for both metal and teak spearguns to reduce recoil when firing. Lead may be added to wings to help reduce recoil. Lead offered by Riffe.

May be installed by end user or by factory.
Installation on older Metal Tech models - factory installation only.

K-6500 / K-6600 (for reel)

MUZZLE REINFORCEMENT Kit

Reinforces the muzzle when adding power.
Recommended when using 4 bands or 3/4" bands.

This kit comes standard on models #W, #I, #4, #5

K-7000

page up

ENCLOSED TRACK Kit
The new enclosed track kit was designed primarily for those who prefer to free-shaft. This kit is used on the RIFFE Metal Tech Series spearguns only.

You may order the enclosed track assembled at time of purchase or as a kit for existing RIFFE metal spearguns. Available for all stock lengths.

 

TEAK MAINTENANCE Kit

  • Maintains beauty of stock
  • Two types of teak oil, #1 & #2
  • Wet/dry paper (80, 320 and 600 grit)
  • Complete teak care instructions included

TM-1000

Teak Maintenance Kit

page up

Misc. Speargun Parts

A = Handle (w/ screws)
B = Butt End
C = Stainless Steel Trigger
D = Stainless Steel Trigger Mechanism
E = Shackle
F = Line Anchor (w/screws)
G = Front Line Plate Guide
H = Line Release
(w/screws)
I = Pigtail Ballbearing Swivel (440 lb. test)

 

 

click for a complete PARTS LIST listing

GO BACK

RIFFE INTERNATIONAL, INC.
1214 Puerta Del Sol - San Clemente, California 92673 USA

1.800.SPEARGUN (773-2748) toll free in the USA
Phone (949) 361-2818 Fax (949) 361-2885

E MAIL:
info@speargun.com




Web site designed by Jill Riffe
2005 © Copyright RIFFE International, Inc.

Wednesday, February 28, 2007