page up
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Products listed on this page
: 2 Atomsphere Float - torpedo divers float - utility float - float lines assmeblies - float system accessories

2 Atmosphere Float
The RIFFE 2 Atmosphere Torpedo Float was designed to maintain lift up to 95 lbs at a depth of 66 ft (2 atmospheres). This is done by pressurizing the float up to 25 lbs PSI. The float is constructed of the strongest light weight material available and will fold up to (14” x 14” x 2” = 4 lbs) for easy transporting. The outside material is constructed of 22 oz. heavy duty vinyl coated nylon with a 320 lbs/sq. tear strength.

The 2 Atmosphere Torpedo Float comes standard with a side zipper for access to the inner replaceable urethane bladder. The zipper is reinforced with (5) five 1 ½” buckled nylon straps. The bladder has a reinforced 1000 lb. Denier Cordova sleeve with nylon belted straps.

Features:

  • Two side handles and one rear handle
  • Comes with emergency Flair holder
  • Set up to use a flag & ballast weight of 3 lbs lead shot (flag & weight not included)
  • Comes standard with Air Pressure Gauge
  • BC Air Blower with adapters available for most manufacturers
  • Compressor or scuba tank is the preferred filling method
  • May be filled by tire pump
  • Safety orange color

 

 

 

TORPEDO DIVERS FLOAT
page up

PART # F-1011

  • 40" Length & 10" diameter with a tapered nose
  • New! Stronger 420 Denier Nylon / Urethane
  • 24" Fiberglass flag pole
  • 12" Square diver down flag
  • 80 lbs. of lift at surface
  • Capable of positive 6 lb. inflation by pump, 2 lb. by mouth
  • Stainless steel D-Ring for effortless towing
  • Side & Rear handles
  • Hi-Vis rescue orange color
  • Excellent use by scuba training classes as a safety float
  • Removeable Weight System
  • Designed with travel in mind, THE TORPEDO DIVERS FLOAT is easily inflated by mouth, and when deflated stores for travel

page up

UTILITY FLOAT with C02 activator

  • Stronger 420 Denier Nylon / Urethane
  • Stores in integrated surface
  • 16 gm cartridge included (standard)
  • 25 gm & 38 gm available for deeper dives
  • 36" long when inflated

Optinal accessory: Utility Float Holder

 

 

Utility Float

PART # F-1000

 


page up

FLOAT ACCESSORIES

International Diver Down
Alpha Flag
Flag Base

Float Patch Kit

PART # F-1015


PART # F-1016

INCLUDES:
2 DIA. PATCHES, AQUA SEAL

PART # F-1017


Vinyl & Bungie Float Line Assemblies
page up

 

Standard Float Lines are made of a Vinyl material with a 400 lb. test tuna chord inside for strength. Available in blue or black

Bungie Float Lines are made of a rubber that is UV & environment protected against sunlight, heat, rotting, etc. with 550 lb. (227kg) test parachute chord inside for strength. The bungie float line stretches 2.5 times its length test . Blue Water Bungies are not for use around sharp surfaces. Used separately or in conjunction with a float line.

Available sizes:

  • 25 ft. (7.6M)
    PART # L-4020 vinyl B-4030 bungie
  • 50 ft. (15.2M)
    PART # L-4015
    vinyl B-4035 bungie
  • 75 ft. (22.9M)
    PART # L-4010
    vinyl B-4040 bungie
  • 100 ft. (30.4M)
    PART # L-4005
    vinyl B-4045
    bungie

page up

 

10 ft. Tag Line Assembly
(3.05M)
w/ small float

This float line is used while blue water hunting for big game. Used in between two torpedo floats.

PART # L-4025

 


click for complete product line - parts list

GO BACK

RIFFE INTERNATIONAL, INC.
1214 Puerta Del Sol - San Clemente, California 92673 USA

1.800.SPEARGUN (773-2748) toll free in the USA
Phone (949) 361-2818 Fax (949) 361-2885

E MAIL:
info@speargun.com




Web site designed by Jill Riffe
2005 © Copyright RIFFE International, Inc.

Wednesday, June 20, 2007Wednesday, June 20, 2007Wednesday, June 20, 2007Wednesday, June 20, 2007Wednesday, June 20, 2007